SKB700-FP cheers pouch bag making machine

Name Details Function 2-up 3 sides seal bag 2-ups 4-sides-seal 2/4-ups cheers pouch Main roll non-stop unwind and register control Side gusset non-stop unwind and register control Double unwind and automatic register control Film OPP 20µ / VMOPP 20µ / CPP 70µ, BOPP,CPP,PET,PE,Nylon and Aluminum and other plastic laminating films and paper-plastic laminating material. Film Thickness 70-190 micon Film roll size(Length *diameter) mm Main roll Side gusset roll 1200*Ø800 300*Ø800 3”air shaft 3”air shaft Range for bag making size (H*W*SG D*B D) mm 3 sides seal 4-sides-seal 2-ups cheers bag 4-ups cheers bag 100-600(H) 100-300(W) 100-600(H) 100-300(W) 100-300(H) 100-300(W) 25-90(side gusset) 100-150(H) 100-300(W) 25-90(side gusset) Bag making speed: 50-150 shots/min 50-150 shots/min 30-140 shots/min 30-110 shots/min Depend on final size, material and bag making feature for final working speed. Unwind speed 35 meters/min(Just for machine’s unwind only). Skip feed no Main motor 5KW—1set Traction servo NO.:1 NO.:2 NO.:3 2.0KW 1.5KW 2.0KW Double cutter Cutting servo motor Moving cutter servo motor 1.0KW 0.75KW Side gusset film working servo motor unwind control Cutting Point heater Mechanical arm traction 1.0KW—2sets 0.75KW—1set 1.5KW—1set 2.0KW—1set Eye mark accuracy ?+-0.5mm. Sealing method Mechanical press seal (spring and working step with main motor) Main power Voltage Total Power 380V, 60HZ, 3 phase Turn on:95KW, Normally run:70KW Run support (By buyer’s) Air Compressor Chiller machine (cold water) 1-5MPA 1.5P (3000W), 1.5Liter/hour Cover box material machine cover is stainless steel #304, easy cleaning and nice looking. Frame design Machine body is interlocking structure, all spare parts are black ,phosphating special treatment, the structure is good for high-speed,working, stable working, high-pressure, longer service life; and thickness is 10mm for each board Machine’s size L*W*H= 15000*3800*2200mm Machine’s weight 15500KG Control system: Control system Electrical cables design Intelligent control IC modules CE CE certification for whole electrical safe Wooden pallet Fumigation certificate and report 3. specifications and configuration Name Details Main film unwind 2 sets separate controlled and unwind machinery design. Unwind speed controlled by AC motor and inverter , Motor capacity: 0.55KW Air shaft , brake and dance rolls controlled for unwind tension. Up and down film automatic register controlled design, Down main film have non-stop exchanged new rolls feature and store 40 meters of film. Side gusset film unwind: 1 set unwind controlled and have non-stop exchanged new rolls feature. Unwind speed controlled by AC motor and inverter , Motor capacity: 0.2KW Air shaft , brake and dance rolls controlled for unwind tension. automatic register controlled design, non-stop unwind store 20 meters of film. Mid-slitting of main web 1 set slitting knife unit, cutting position controlled by EPC system. 2 sets of sensor and 1 set of EPC automatic deflection control for slitting position. Double cutter Control by two servo motor and working range is 0.5-5mm. Can choose single cutter or double cutter by computer. Horizontal sealing 5sets, length is 740mm, width is 60mm, power consumption is 2.5KW. lifting unit by cylinder after machine stop working. Horizontal cold 2sets, length is 740mm, width is 60mm (1set have skip feed feature) Vertical sealing 2sets, length is 640mm, width is 60mm, power consumption is 2.5KW, separate with vertical cold. Vertical cold 2sets, length is 340mm, width is 60mm. Fold bottom mid sealing 1set, length is 300mm, with is 40mm, lifting unit by cylinder after machine stop working Side gusset sealing 1set(3pcs heater), sealing by servo motors. Collection table 1set for standard collection table, length is 1000mm. 1set for automatic unwind final bag machine, adjust speed by manual Security system Emergency stop—3sets, or installation the safety line. Temp. Control 24sets (front is 12set, back is 10 sets) Punches installed device Front punches installed device—3sets Side gusset punches installed device-1set Tear punch: 2*9—2pcs Round hole: 15mm—1pc Round corner punch: R8—1set(3pcs) Static elimination 1set, have the air pressure system for double cutter waster. Trim 3sets, slitting cutter enter roll. Side gusset mid slitting by AC motor. Arm Automatic arm for servo motor, film final, Temp. unusual. sensor High sensitive eye mark for catching the graph, Adjustable for any location