Exhibitors

■ Servo motor and invertor system. ■ Easy to operate with the buttons for temperature, production number, machine speed etc. on the control screen. ■ Bag size, speed and position of robot are automatically adjusted according to the bag size on the machine. All data can be monitored on the screen. ■ Bobbin warping is proceeded with the motor-driven roller system according to the diameter of the bobbin. ■ Product out system runs with sensor. Thus, the machine stops automatically when the product is finished. ■ Edge control system is placed on the top of the machine, it is ensured that high weight bobbins are connected and edge control is carried out precisely. ■ Printed bags are also cut precisely with the photocell system. ■ Automatic tilting jaw system with pneumatic equipment enables easy use for the operator. ■ Each bag is stacked on hot and cold needles from 10 cm end. ■ With the zig-zag group, it is ensured that the welding zones do not overlap. ■ Waste discharge press group is proceeded with hydropneumatic system. The cut wastes are carried out of the machine by the fire conveyor. ■ The cut products are stacked on the conveyor at the release section of the machine and transported to the operator. ■ Having capacity to work with high density polyethylene (HDPE), low density polyethylene (LDPE), 2nd quality recycling and bio materials.

■ Servo motor and invertor system. ■ Easy to operate with the buttons for temperature, production number, machine speed etc. on the control screen. ■ Bag size, speed and position of robot are automatically adjusted according to the bag size on the machine. All data can be monitored on the screen. ■ Bobbin warping is proceeded with the motor-driven roller system according to weight. Product out system with sensor is used. ■ Thus, the machine stops automatically when the product on the bobbin is finished. ■ Motor-driven edge control system is used on the machine. ■ Hot slicing and welding unit are optional. Other equipment can be added on request. ■ Printed bags are cut precisely with the photocell system. ■ Each bag is stacked on cold needles from 10 mm open end. ■ The cut products are stacked on the conveyor at the exit section of the machine and transported to the operator. ■ Having capacity to work with high density polyethylene (HDPE), low density polyethylene (LDPE), 2nd quality recycling and bio materials. ■ It produces bags with bottom seam.

■ Servo motor and invertor system. ■ Easy to operate with the buttons for temperature, production number, machine speed etc. on the control screen. ■ Bag size, speed and position of robot are automatically adjusted according to the bag size on the machine. All data can be monitored on the screen. ■ Bobbin warping is proceeded with magnetic brake and loadcell according to weight. Product out system with sensor is used. Thus, the machine stops automatically when the product is finished. ■ Bobbin lifting group enables more practical loading of bobbins with its locking wheel. ■ Motor-driven edge control system is used on the machine ■ Pneumatic ballerina system with reductor and invertor is used on the machine. ■ Slowing down gripper system is used on the machine. ■ Strap motor speed settings are carried out easily with reductor. ■ Standart machine has taping and cold slicing units. ■ Synchronous roller and lower jaw are used as rotating silicone on the machine. ■ Optionally, hole drilling and ultrasonic welding unit, additional welding and envelope apparatus can be added. ■ Side cutting is proceeded on the standard machine. ■ Printed bags are cut precisely with the photocell system. ■ Automatic tilting jaw system with pneumatic equipment enables easy use for the operator. ■ The cut products are stacked on the conveyor at the release section of the machine and transported to the operator. ■ Having capacity to work with OPP, PP, CPP, high density polyethylene (HDPE), low density polyethylene (LDPE), 2nd quality recycling and bio materials on the standard machine.

■ Servo motor and invertor system ■ Easy to operate with the buttons for temperature, production number, machine speed etc. on the control screen. ■ Bag size, speed and position of robot are automatically adjusted according to the bag size on the machine. All data can be monitored on the screen. ■ Bobbin warping is proceeded with the motor-driven roller system according to the diameter of the bobbin. ■ Product out system runs with sensor. Thus, the machine stops automatically when the product is finished. ■ Edge control system is placed on the top of the machine, it is ensured that high weight bobbins are connected and edge control is carried out precisely. ■ The slicing and welding unit is ergonomically designed for the operator. ■ The bellows system is designed to enable easy access to the settings. ■ Edge control is added after the bellows system, ensuring edge sensitivity. ■ Printed bags are cut precisely with the photocell system. ■ Automatic tilting jaw system with pneumatic equipment enables easy use for the operator. ■ Each bag is stacked on hot and cold needles from 10 cm end. ■ With the zig-zag group, it is ensured that the welding zones do not overlap ■ Waste discharge press group is proceeded with hydropneumatic system. The cut wastes are carried out of the machine by the fire conveyor. ■ After proceeding of the press group, folding and ironing processes can be carried out. ■ The cut products are stacked on the conveyor at the release section of the machine and transported to the operatör. ■ Having capacity to work with high density polyethylene (HDPE), low density polyethylene (LDPE), 2nd quality recycling and bio materials

No product info found.

No product info found.

No product info found.

■ Servo motor and invertor system. ■ Easy to operate with the buttons for temperature, production number, machine speed etc. on the control screen. ■ Bag size, speed and position of robot are automatically adjusted according to the bag size on the machine. All data can be monitored on the screen. ■ Bobbin warping is proceeded with magnetic brake and loadcell according to weight. Product out system with sensor is used. Thus, the machine stops automatically when the product is finished. ■ Bobbin lifting group enables more practical loading of bobbins with its locking wheel. ■ Motor-driven edge control system is used on the machine. ■ Pneumatic ballerina system with reductor and invertor is used on the machine. ■ Strap motor speed settings are carried out easily with reductor. ■ Standart machine has taping and cold slicing units. ■ Synchronous roller and lower jaw are used as rotating silicone on the machine. In addition, bottom seam jaw system, double bobbin clamp system, double welding (athlete bag cutting) are available. ■ Optionally, hole drilling and ultrasonic welding unit, additional welding and envelope apparatus can be added. ■ Printed bags are cut precisely with the photocell system. ■ Automatic tilting jaw system with pneumatic equipment enables easy use for the operator. ■ The cut products are stacked on the conveyor at the release section of the machine and transported to the operator. ■ Having capacity to work with OPP, PP, CPP, high density polyethylene (HDPE), low density polyethylene (LDPE), 2nd quality recycling and bio materials on the standard machine.

■ Servo motor and invertor system. ■ Easy to operate with the buttons for temperature, production number, machine speed etc. on the control screen. ■ Bag size, speed and position of robot are automatically adjusted according to the bag size on the machine. All data can be monitored on the screen. ■ Bobbin warping is proceeded with magnetic brake and loadcell according to weight. Product out system with sensor is used. Thus, the machine stops automatically when the product is finished. ■ Bobbin lifting group enables more practical loading of bobbins with its locking wheel. ■ Motor-driven edge control system is used on the machine. ■ Pneumatic ballerina system with reductor and invertor is used on the machine. ■ Strap motor speed settings are carried out easily with reductor. ■ Standart machine has taping and cold slicing units. ■ Synchronous roller and lower jaw are used as rotating silicone on the machine. In addition, bottom seam jaw system, double bobbin clamp system, double welding (athlete bag cutting) are available. ■ Optionally, hole drilling and ultrasonic welding unit, additional welding and envelope apparatus can be added. ■ Printed bags are cut precisely with the photocell system. ■ Automatic tilting jaw system with pneumatic equipment enables easy use for the operator. ■ The cut products are stacked on the conveyor at the release section of the machine and transported to the operator. ■ Having capacity to work with OPP, PP, CPP, high density polyethylene (HDPE), low density polyethylene (LDPE), 2nd quality recycling and bio materials on the standard machine.

No product info found.