Ak1800 The Roll Sack Machine With Perforator ( Automatic Loading System )

This machine is suitable for making heavy duty bags from roll to roll with LLDPE, LDPE, MLDPE, HDPE, EVA, CPP, OPP, PP, PE and PA materials. * Thickness of the film can be welded: Minimum 50 microns (2×20- Double layers Tubular form), Maximum 1000 microns (2×500-Tubular form or 4×250-Gusseted tubing form) * The length of the film can be processed: Minimum 5cm (50mm) Maximum 9999,9cm(999999mm) PLC controlled operation control panel TFT screen with touchpad Single unwinder, Double winder Holders of bobbin with pneumatic shaft Three independent rezistance wires(heater) can use independently for making a weld and controlled by digital impulse control system 1. heater – 2. heater – 3. heater 1. and 2. heaters 1. and 3. heaters 2. and 3. heaters Only Perforation is possible without welding Only Transfering is possible without measurement Maximum 950 mm diameter of bobbin can be loaded on unwinder shaft Maximum 600 mm diameter of bobbin can be loaded on winder shafts Maximum 300 kg. of bobbin can be loaded on unwinder and winder shafts Diameter(outside) of shaft(winder/unwinder); 70mm ” it is for 76mm (inner diameter) of carton bobbin” A.C. motor speed control drivers Output digital counter (mm measurement) Alarm for resistance wire breake Emergency auto-stop system with reflective photocell Optionally; Color photocell can be affixed for printed products Optionally; Static electricity receiver bar Banana Rollers For Properly Wrapping. Air blowing system for jaw. Power Consumption; During working time it is between 1,0- 2,5kW Total power; 3P 380V+N+MP, 8,80 kW, 50Hz Total air supply; 8 – 10 bar It is possible to produce one side open bag on two separate bobbin with cold slicing knife Shaft safety chucks Bobbin loading system for unwinder.