Seiii Series Servo Motor Plastic Injection Molding Machine

Our SEIII series machines have double close-loop control system. Excellent Energy Saving The newly developed SEIII series energy-saving injection molding machine is the integration of advanced servo-drive pump system and our 35 years of experience in injection molding machine production. Compared with the standard machine, you can save 25-85% energy. This percentage range varies especially depending on the ironing and cooling time. Energy savings reach the maximum percentage in cycles with high cooling and ironing times. Fast Response High Efficiency With the quick response feature of the servo motor, the motor can accelerate from stationary to 1500 rpm in as little as 40 ms. This increases the speed of the hydraulic system and reduces the ironing and injection time. Thus, the production quantity is increased. Printing Accuracy The use of the servo hydraulic system has minimized the weight differences in successive prints. Printing accuracy in consecutive cycles is around 0.3%. Low - Speed Stability The system pressure and speed show excellent performance in a closed circuit controlled low pressure and low speed operating environment. Even when the injection speed is below 1 mm/s, there is no jitter or stuttering and high stability. The system allows the freedom to change the speed and pressure settings as desired according to the mold in order to avoid extra heating of the hydraulic oil, which can be destabilizing as in conventional machines. In addition, the system automatically compensates for pressure and flow losses, ensuring stability, precise control and high repeatability.