Jseii Series Two-Platen Plastic Servo Motor Injection Molding Machine

In addition to the 50-80% energy savings, each model of machine has a three-phase digital electricity meter and you can see your hourly consumption on the display. Continuously printing the same weight, i.e. the deviation in repeatability is around 0.4%. The cooling system required is half as much as for normal machines. Average (30-40% less) The amount of hydraulic oil needed for normal machines is 30% less for our JSEII series machines. So you will pay less money in installation. You will also save money on periodic oil changes. It is 10% faster than normal machines, so the amount of product produced increases with the number of cycles. With the flash memory in our machines, as many molds as desired can be memorized and copies can be made from one machine to another machine. In our machines, it is possible to monitor production for control purposes with remote access devices such as computer, ipad and iphone etc. (changes cannot be made, only monitored). With the multi-level password feature, authorized and unauthorized personnel can limit what they can do on the machine. Our JSEII series machines have a double close-loop control system. Faster cycle time with high speed mold movement Repeatability in mold opening position 1mm Synchronized movement structure with locking nut, no effect on the injection unit. It provides precise and smooth operation with its linear slide structure. Injection grammage repeatability 0.3 Wide inter-column distance, long mold height and long mold opening stroke. Stable production even at very low speeds with AC servo motor. Superior product repeatability, even at very low speeds and long ironing pressures.